{Return to Moss Main Page}TM

Watering Systems Product Range

In-line Tap, 13mm (1/2")

G202-Q

 In-line Tap
You will find a Moss In-Line Tap very useful where you wish to prevent water from flowing in a particular feed line, and divert it elsewhere.
Cut the tubing at a convenient point and push it over the barbed connection.

Fit two Moss Tubing Clamps for a good seal.

You can place it at any convenient location in your garden.		 In the garden bed !
Some uses include:
  • to turn branch lines off and on
  • during wet weather
  • when doing repairs
  • to water different garden zones
  • to seperate different watering system types
  • for zones needing water only occasionally


Moss In-Line Taps are designed to be used as a water diverter, with the water at operating pressure in a garden watering system. They are not designed as a stop-taps for use against full static water pressure. If you wish to turn the water off under full static pressure for long periods, make sure you do so at the main tap.		 In-line tap on frame.