|
Watering Systems Product Range |
Full Circle Micro/Misting SprayG310-Q and G310 |
 |
| This Sprayhead was designed as a genuine Misting Sprayhead.
However if it is operated at a lower water pressure of around 100KPa (15 psi),
it functions remarkably well as a Microspray, giving a very gentle spray. This makes it very useful in garden beds as part of a Moss Spikespray system where you have smaller, or more delicate plants or flowers scattered in your larger beds. You can raise the Micro/Misting spray above plant foliage with Moss Extension Tubes (G53) as shown. Alternatively you can use Threaded Risers. |
|
| To function as a Microspray, without excessive mist, the
optimum working pressure is around 100KPa (15psi). Radius of Spray at 100KPa is 1.4 metres. Output of Spray at 100KPa is 1.3 litres per minute. Average precipitation is 12 mm/hr. The evenness and quality of the water spray is excellent, however it will not tolerate much wind, unless in a protected zone. |
 |
| This is a solid metal sprayhead with two precision nozzle
inserts held together with a machine screw. There is an in-built filter to
strain out dirt particles. However, because of the tiny nozzle orifice, it is sometimes neccessary to clean them. Simply undo the screw and wash the two nozzle inserts under running water. The internal thread in this sprayhead is 1/2 inch BSP. |
 |