|
Watering Systems Product Range |
Full Circle Brass JetsprayG369-Q |
 |
| A single piece Jetspray machined from brass rod, giving a full circle spray
pattern. This is achieved by machining a spray deflection groove into both
sides of the micro sprayhead, in effect creating two half circles. For control of spray distance and water flow, use with the Moss In-Line taps (G201-Q) as shown here. In garden beds, raise above the plant foliage with Moss Extenda-Stakes as shown. Will also function well as an overhead spray in greenhouses. |
|
| Maximum Spray Radius: 2.0 metres Maximum Water Flow Rate: 1.0 litre per minute Suggested Spacing: 3.5 metres Minimum Spray Radius : 0.5 metre Best operating pressure: 100KPa (15 psi) |
 |
| You can also fit these Brass Jetsprays to a Moss Extension Tube (G53) or
Threaded Riser using the Adaptor as shown here. A Moss In-line Filter (G415) fitted to the main line will reduce blockages at the sprayhead. If you have very high water pressure, use a Moss Filter/Regulator (G417) to reduce line pressure to 100 KPa as well as filtering the water. |
 |