Watering Systems Product Range |
Large Spinner SprayheadG371-Q and G371 |
![]() |
| A solid metal Sprayhead giving a Full Circle Spray pattern. The advantage of this sprayhead is that it covers a very large area with low water flow and pressure. Attach to Moss Spike Bodies which anchor them firmly in place in garden beds. Raise the spray above plant foliage with Moss Extension Tubes (G53) as shown, or Threaded Risers. The internal thread is 1/2 inch BSP. |
|
| This Sprayhead will function well over a range of water
pressures, but the optimum is around 100KPa (15psi). Radius of Spray at 100KPa is 4.5 metres. Output of Spray at 100KPa is 2.3 litres per minute. |
|
| Use this Sprayhead in wide garden beds where you want to water
a very large area. The spinning rotor throws the water droplets very
efficiently making it suitable if your water pressure is low or you want to run
it from a pump. It creates a medium droplet size with good wind resistance. However, with this sprayhead the watering time will be much longer than the other Full Circle Spikespray heads G50 and G51. |
![]() |