{Return to Moss Main Page}

Watering Systems Product Range

Pressure Regulator and Filter

G417-Q and G417

Moss In-line Filter-Regulator
Filters the water to prevent blockages at Sprayheads or Drip Emitters and reduces and regulates the pressure.
You can attach the Moss In-line Filter-Regulator to both 13mm (1/2 inch) and 19mm (3/4 inch) tubing and place it anywhere in the garden.

It contains the same filter insert as in the Moss Filter (G415), and is easily removed for occasional cleaning.		 Blends into the surroundings

How it Works

Water enters one end at high pressure and passes through the filter insert. It then goes into a pressure reduction chamber and comes out at a constant low pressure of 100 KPa (15 psi).

You can safely operate Moss Slo-Flo or Drip watering systems at this low pressure. You will also find it useful on Microspray systems to prevent excessive misting caused by high water pressure at the sprayheads.
High   Low
Pressure   Pressure
IN   OUT

See also:
Technical Data on Moss Pressure Regulator
If you wish to connect the Moss Pressure Regulator and Filter to ordinary garden hose with Click-On fittings, remove the barbed connectors and fit a Moss Tap Nut as shown. Moss Tap Nut attached.