|
Watering Systems Product Range |
Hole Punch and Repair PlugsG431-QThis tool is invaluable for all Microspray and Drip Watering systems. |
 |
| Use it to punch a neat hole in the main tubing to enable a feeder tube to be attached | |
| Support the main tubing on a firm surface and press the pointed punch through the wall of the tube. You will be surprised how easy it is with this remarkably simple tool. |  |
| Extract the punch and you will be left with a neat hole which ensures a
good seal around the fitting. Now you can insert a Moss 5mm Joiner to attach a 5mm feeder tube for Microsprays or Drip Emitters. |
 |
| Alternatively, you can thread a Moss Rigid Riser directly into the hole for a leak-free seal. |  |
| Position the tubing in the garden bed and you are all set to water. |  |
| If at any time you want to remove a Microspray or Drip Emitter, you can block off the hole using one of these handy plugs. |  |
| The Moss Hole Punch comes on a convienent frame along with 20 Plugs. Hang it on a hook in the shed. As your garden grows and changes, you are sure to need it again in the future. |
 |