{Return to Moss Main Page}

Watering Systems Product Range

Full Circle Sprayhead

G50-Q and G50

 {Full Circle Sprayhead on Extension Tube}
A solid metal Sprayhead giving a Full Circle Spray pattern.
An internal insert causes the water to swirl around inside the dome and emerge with a very even spray pattern.
Attach to Moss Spike Bodies which anchor them firmly in place in garden beds.
Raise the spray above plant foliage with Moss Extension Tubes (G53) as shown, or Threaded Risers.
The internal thread is 1/2 inch BSP.
This Sprayhead will function well over a range of water pressures, but the optimum is around 100KPa (15psi).
Radius of Spray at 100KPa is 2.5 metres.
Output of Spray at 100KPa is 5.3 litres per minute.
Average precipitation is 22mm/hr.

The evenness and quality of the water spray is excellent.		 {Full circle spray pattern showing the 'radius'.}
Use this Sprayhead in wide garden beds where you want to water a larger area than you can cover with Microsprays.

It creates a large to medium droplet size with very good wind resistance.		 {Full Circle Dome Sprayhead}

Detailed Performance Data

The chart below gives the Sprayhead Output and Radius at different operating pressures.

G50 Performance
Pressure Output Radius of Spray
KPa litre/min metres
35 3.2 1.6
70 4.6 2.3
100 5.3 2.5
150 6.4 3.0
200 8.0 3.3
The data is based on the Sprayhead at a height of 600mm and the radius measured at ground level.

If the Sprayhead is operated at ground level, the radius of spray will be less.