{Return to Moss Main Page}

Watering Systems Product Range

Impact Sprayhead

G505-Q

{Impact Sprayhead on Extension}
This sprayhead covers a very large area, and is ideal for very large gardens. The name comes from the mechanical action of the blue deflector arm which is thrown sideways by the water jet and returns under spring action with an "impact". This causes the spray nozzle to rotate slightly, and water another section.

You can raise the Impact Sprayhead with Moss Extension Tubes (G53) as shown, or Threaded Risers.

Full Circle Operation

By placing the trip lever in the up position, the "impacts" will continue to move the spray in a complete circle.

At the recommended water pressure of 200KPa (30psi), the radius of spray will be up to 11.5 metres, and the output water flow will be 9.3 litres per minute. 		{Full circle spray pattern showing the 'radius'.}

Part Circle Operation

By moving the trip lever to the down position, and adjusting the two sector control arms, you can reduce the spray pattern to any part circle required (down to 25 degrees)

This Sprayhead creates a very strong jet of water with good wind resistance. 		{Impact Sprayhead sketch showing the 'trip lever'.}
You can also adjust the brass "diffuser" screw to vary the distance of the spray.

The Moss Impact Sprayhead is packed complete with with an adaptor (1/2" BSP thread) to enable you to fit it directly onto a Moss Extension Tube or Threaded Riser.		 {Sprayhead in pack with instructions}