Watering Systems Product Range |
Full Circle SprayheadG51-Q and G51 |
![]() |
|||||||||||||||||||||
| A solid metal Sprayhead giving a Full Circle Spray pattern. The top section can be adjusted to vary the amount of water and the distance sprayed. Attach to Moss Spike Bodies which anchor them firmly in place in garden beds. Raise the spray above plant foliage with Moss Extension Tubes (G53) as shown, or Rigid Risers. The internal thread is 1/2 inch BSP. |
||||||||||||||||||||||
| This Sprayhead will function well over a range of water
pressures, but the optimum is around 100KPa (15psi). Radius of Spray at 100KPa is 3.4 metres. Output of Spray at 100KPa is 5.3 litres per minute. Average precipitation is 20mm/hr. |
||||||||||||||||||||||
| Use this Sprayhead in wide garden beds where you want to water
a larger area than you can cover with Microsprays. It creates a medium droplet size with good wind resistance. |
![]() |
|||||||||||||||||||||
Detailed Performance DataThe chart below gives the Sprayhead Output and Radius at different operating pressures.
|
The data is based on the Sprayhead at a height of 600mm and the
radius measured at ground level. If the Sprayhead is operated at ground level, the radius of spray will be less. |