TM| TM |
Watering Systems Product Range |
Double NutGA011 |
 |
| The Moss Double Nut is used to connect valves, joiners tees and taps together under high water pressure. | |
| Each nut can be tightened or loosened independent of the other. So you can
connect two pipes or fittings as shown here. Inside each nut is a soft, compressible washer which creates the seal, even under water pressure up to 800 KPa. The nuts should be tightened firmly by hand, squeezing the washer between the end of the fitting and the inside of the nut. |
 |
| Use the Moss Double Nut to build your own manifold system. The internal thread is 3/4" BSP, so it will connect to all common fittings and taps. |
 |