Return to Moss Main Page.TM

Watering Systems Product Range

13mm Polytube x 20meters

PT13-20

 13mm Polytube

Use as a supply line for Microsprays, Drip Watering, Slo-Flo, Spikespray and Misting Sprays.
The inside diameter is 13mm (about 1/2").

Maximum Water Flow Rate: 30 litres per minute

Suggested Maximum Length: 50 metres

Note: 13mm Polytube is designed to operate at pressures up to 200 KPa (30 psi) which is the operating pressure to be expected in typical garden watering system.

It is not designed to operate at full mains pressure, say 600 KPa, which is the pressure generated when no water is flowing.

Therefore, 13mm Polytube should not be used with a stop tap in the line. Instead, turn the water off at the tap so the pressure in the Polytube never builds up to full mains pressure.